SOS ARDUINO GUILLEM

This is a practical project using Arduino & a LED order to give a message in Morse code.

Here's how you can make bold and italic text.

Here's how to create an arduino code to tur on and off a LED:

Here's how to make a list:

• Download the Arduino software at this link
• Understand the rules of the morse code
• Convert the rules of morse to Arduino
• Open the Arduino software
• Connect the LED in pin number 13 and GND of the Arduino board like this image.

• To work with Arduino you need to open the device administrator (Administrador de dispositivos).

• You have to enter to the Unknown dispositives (Dispositvos desconocidos) subtopic in other dispositives (otros dispositivos).Then click to update software (Actualizar software).

• Click to search controlator software in the computer/PC (Buscar software de controlador de dispositivo en el equipo).

• Search the software in the computer.

• Then you can browse to find the drivers for Arduino (Examinar).

• When it appears a window to search in the folders, find the folder named drivers inside the ARDUINO folder in removable disc (Disco extraible).

• Select the folder and click to accept.

• You will be back on the previous window and click to next (siguiente).

• Click on tools (Herramientas) and enter to port and then to COM3 to select the driver. The Firmata library implements the Firmata protocol for communicating with software on the host computer. This allows you to write custom firmware without having to create your own protocol and objects for the programming environment that you are using. You can recieve and send analog message using Firmata too. That is all that you have to do to be able to use arduino on your computer.

    void set up()
    
int counter;

void setup()
{
  pinMode(13, OUTPUT);
}

void loop()
{
 //S
  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)
  
 //O
  digitalWrite(13, HIGH);
  delay(600);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(600);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(600);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(600);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(600);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(600);Wait for 200 millisecond(s)
  
  //S
  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)

  digitalWrite(13, HIGH);
  delay(200);Wait for 200 millisecond(s)
  digitalWrite(13, LOW);
  delay(200);Wait for 200 millisecond(s)
  
  space between SOS and Guillem
  delay(1400);wait seven times to separate words
}

To learn more HTML/CSS, check out these tutorials!